Illustration of a solar panel array with a sun in the corner

Why prepare before the first quote?

Most homeowners meet solar for the first time through a sales conversation. That is not a problem in itself, but it means the first numbers you see are someone else's assumptions. If you spend an hour gathering your own data first, every quote that follows becomes easier to judge. The ten steps below are the same inputs the FreshSuns calculators ask for, arranged in a sensible order.

1. Collect twelve months of electricity use

Your bills or your utility's online account show kilowatt-hours (kWh) used each month. A full year matters because summer air conditioning and winter heating can make individual months very different. Add the twelve months together to get annual use, the single most important sizing input.

2. Note how you are charged

Write down whether you pay a flat rate, tiered rates or time-of-use rates, and what fixed monthly charges apply regardless of use. Solar reduces the energy portion of a bill, not usually the fixed connection charge, so separating the two keeps savings estimates honest.

3. Find out how your utility credits exported power

Ask your utility or check its website for the current rules on rooftop solar: full retail net metering, a reduced export credit, or something else. This one policy can change the value of a system more than panel brand or efficiency.

4. Think about the next ten years of use

Are you planning an electric vehicle, a heat pump, an induction range or a home office? Each can add meaningful electricity use. List likely changes so you can decide whether to size for today or for the household you expect to have.

5. Sketch your roof

Note which roof faces get the most sun, roughly how large they are, and what obstructions sit on them: vents, chimneys, skylights. A rough sketch with approximate dimensions lets you sanity-check the system size a quote proposes.

6. Look honestly at shade

Walk around at different times of day and note trees, neighbouring buildings or dormers that shade the roof. Shade reduces output, and some quotes model it more carefully than others. If a tree is likely to be trimmed or will grow taller, note that too.

7. Check the roof's age and condition

Panels typically stay in place for decades. If the roof will need replacing soon, removing and reinstalling panels later adds cost. Many homeowners find it simpler to deal with the roof first; at minimum, ask installers how they handle it.

8. Decide how you would pay

Cash, a loan, a lease or a power purchase agreement each change the maths. With cash, the key number is payback time. With a loan, compare the monthly payment to the expected bill reduction. With a lease or PPA, you do not own the system, so read the escalator and transfer terms carefully.

9. Run a calculator with conservative inputs

Use the FreshSuns calculators with your real usage and rate, and with no incentives unless you have confirmed one applies to you. Then run the numbers again with a slightly lower electricity price increase and slightly lower production. If the project still makes sense under cautious assumptions, it is more robust.

Incentive note (October 2026): the US federal residential clean energy credit (Section 25D) ended for expenditures made after 2025, so a homeowner buying a system today should not assume a 30% federal credit. State, local and utility programs vary and change often; check what is currently available where you live before relying on any incentive in an estimate.

10. Write down your questions

Before installers visit, list what you want each one to state in writing:

  • System size in kW and expected first-year production in kWh, and how it was modelled.
  • Panel and inverter make and model, and the warranty terms for each.
  • Total price, price per watt, and what is excluded.
  • Workmanship warranty, who handles permits and utility interconnection, and expected timeline.
  • Assumptions used for utility rate increases and export credits.

Putting it together

None of these steps require technical training. They simply move you from listening to a pitch to comparing proposals against your own numbers. A calculator cannot tell you exactly what a system will save, but it can tell you whether a quote's claims are in a plausible range, and that is often enough to spot an offer that needs a closer look. Treat every estimate, including ours, as a starting point for questions rather than a promise.

About Freshsuns

Free solar planning calculators and plain-language guides for homeowners. Learn more.

Newsletter